210,00 €
185,10 €
×
Afdrukken of opslaan als PDF
U wordt doorgestuurd naar de interface van uw browser om af te drukken en op te slaan als PDF.
Selecteer de optie die bij u past in het "Bestemming” vervolgkeuzemenu
Details over beschikbaarheid
036455 · Protection filter Vacu-Guard 150 activated carbon Whatman
Beschikbare hoeveelheid: 0
De voorraadindicatie is niet contractueel: deze gegevens veranderen voortdurend en kunnen variëren afhankelijk van de gevraagde hoeveelheden.
036455 · Protection filter Vacu-Guard 150 activated carbon Whatman
For the protection of vacuum or pressurized systems to reduce the risk of exposure to hazardous vapors
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents except water. Allows very rapid drying due to a high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the cartridge is saturated
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents except water. Allows very rapid drying due to a high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the cartridge is saturated
ModelVACU-GUARD 150 Activated Carbon
MaterialMedia: PTFE
Brutogewicht0,35 kg
Extra beschrijvingChemistry: activated carbon
Specific flow rate (SLPM) at 0.1 bar: 210 / Specific flow rate (SLPM) at 0.5 bar: 450
Specific flow rate (SLPM) at 0.1 bar: 210 / Specific flow rate (SLPM) at 0.5 bar: 450
Ambient conditionsMaximum operating pressure:
• Dry gas: 4 bar
• Wet gas: 1 bar
• Dry gas: 4 bar
• Wet gas: 1 bar
DimensionsSurface area: 82,000 m²
Bruto afmetingen28,00 x 7,00 x 7,50 cm
UNSPSC-code41104908
036455 - Manufacturer data sheetProduct(en) in verband met dit accessoire
For protecting vacuum pumps to prevent damage to the essential components in case of liquid backflow. The filter body is made from pure polypropylene and incorporates a PTFE membrane.
Deze categorieën zullen je ook interesseren
Filter paperSyringe filterMembrane filterFiltration funnelFiltration unitFiltration systemFilter capsuleFiltration plateSyringe-less filter for HPLCAccessory for filtrationFiltration supportBüchner funnelFiltration manifoldPre-filterVent filterVacuum vialGeneral-purpose paperComplete filtration unitAccessory for filtration systemReceiver flask for filtration unitComplete filtration systemExtraction cartridgeFiltration fabricJoseph paperFibreglass paperQuartz fibre paper
De voorraadindicatie is niet contractueel: deze gegevens veranderen voortdurend en kunnen variëren afhankelijk van de gevraagde hoeveelheden.