220,00 €
147,40 €
×
Afdrukken of opslaan als PDF
U wordt doorgestuurd naar de interface van uw browser om af te drukken en op te slaan als PDF.
Selecteer de optie die bij u past in het "Bestemming” vervolgkeuzemenu
Details over beschikbaarheid
055077 · LabTek II separable, on glass slide, 2 culture chambers Nunc
Beschikbare hoeveelheid: 0
De voorraadindicatie is niet contractueel: deze gegevens veranderen voortdurend en kunnen variëren afhankelijk van de gevraagde hoeveelheden.
055077 · LabTek II separable, on glass slide, 2 culture chambers Nunc
Aanbevolen toepassing(en)Adherent cell culture, Microscopy and cellular imaging
SterileJa
MaterialGlass
Brutogewicht0,39 kg
Extra beschrijvingNumber of chambers: 2
1 - 2 ml / chamber
1 - 2 ml / chamber
DimensionsSurface area: 4 cm²
Bruto afmetingen30,50 x 13,00 x 6,50 cm
UNSPSC-code41122111
Variant(en)
Culture chamber with 1, 2, 4 or 8 compartments fixed on a 26 x 76 mm microscope slide, equipped with a covering lid. Sterilised by gamma irradiation. Principle: the culture develops in the compartments. Then it is just a case of removing the chamber from the slide and and possibly putting a coverslip over it. The frosted rim of the slide is designed for labelling.
LAB-TEK I: the chamber is fixed to the slide via a silicone joint that just has to be taken off to remove the chamber.
Two surface types:
• Permanox plastic, promotes cell attachment, transparent, no auto-fluorescence, acetone-resistant
• Non-fluorescent glass
Culture chamber with 1, 2, 4 or 8 compartments fixed on a 25 x 56 mm borosilicate glass slide. The thinness and fragility of the slide do not allow for the removal of the chamber. It includes a detachable lid and is sterilised by gamma irradiation. The chambers are presented on a plate that can be kept in the incubator. Interesting: the borosilicate glass slide allows for observations using a reverse microscope.
LAB-TEK I: the chamber is fixed with a silicone joint
Surface: non-fluorescent glass
Culture chamber with 1, 2, 4 or 8 compartments fixed on a 26 x 76 mm microscope slide, equipped with a covering lid. Sterilised by gamma irradiation. Principle: the culture develops in the compartments. Then it is just a case of removing the chamber from the slide and possibly putting a coverslip over it. The frosted rim of the slide is designed for labelling.
LAB-TEK II: the chamber is fixed via an adhesive joint. The hydrophobic rims of each compartment prevent cross-contamination
Two surface types:
• Non-fluorescent glass
• CC2 glass: chemically modified surface strengthens the attachment of reputedly difficult cells (e.g.: neurons). Keep at room temperature.
Culture chamber with 1, 2, 4 or 8 compartments fixed on a 25 x 56 mm borosilicate glass slide. The thinness and fragility of the slide do not allow for the removal of the chamber. It includes a detachable lid and is sterilised by gamma irradiation. The chambers are presented on a plate that can be kept in the incubator. Interesting: the borosilicate glass slide allows for observations using a reverse microscope..
LAB-TEK II: the chamber is fixed via an adhesive joint; the slide has hydrophobic rims to prevent cross-contamination
Surface: non-fluorescent glass
Deze categorieën zullen je ook interesseren
Growth chamber with 1 compartmentGrowth chamber with 8 compartmentsGrowth chamber with 4 compartmentsGrowth chamber with 2 compartmentsAccessory for growth chamberGrowth chamber with 10 compartmentsGrowth chamber with 16 compartmentsGrowth chamber with 12 compartments
De voorraadindicatie is niet contractueel: deze gegevens veranderen voortdurend en kunnen variëren afhankelijk van de gevraagde hoeveelheden.